Inconel X-750 Alloy is mainly a nickel-based high temperature aging strengthened alloy. When in the environment with temperature below 980℃, Inconel X-750 has good performance in corrosion and oxidation resistance, when below 800℃, it will have high strength and below 540℃ will be with good relaxation resistance, good formability and weldability. Inconel X-750 alloy normally is used in manufacture of plane aeroengine's spring and spiral spring which working below 800℃ and requiring high strength and relaxation resistance property.Also it can also be used to manufacture steam turbine blades and other relevant parts.Available types for Inconel X-750 are sheet, strip, bar, forgings, annular, wire and pipe.

 

 

Chemical Composition(%):

Name	Grade	UNS	W.Nr	Ni(min)	Cr	Fe	Ti	Al	Nb	C(max)	Mn(max)	Si(max)	S(max)	Cu(max)	Co(max)
Ni- Cr Alloy	INCONEL X-750	N07750	2.4669	70	14.0-17.0	5.0-9.0	2.25-2.75	0.4-1.0	0.7-1.2	0.08	1	0.5	0.01	0.3	1

 

Typical Mechanical Properties for Inconel X-750:

Name	Grade	UNS	W.Nr	Condition/ Heat Treatment	Tensile Strength/ Mpa(min)	Yield Strength/ Mpa(min)	Elongation/ %(min)
Ni- Cr Alloy	INCONEL X-750	N07750	2.4669	Solution	1170	790	18

 

Inconel X-750 can be also called Nicrofer 7016，Superimphy 750，Haynes X750，Pyromet X750和Udimet X750, UNS N07750, W.Nr 2.4669.

 

Referred Standards of Inconel X-750 Alloy:

AMS 5667

AMS 5671

AMS 5698

AMS 5699

ASTM B637

BS HR 505

GE B14H41

ISO 15156-3 (NACE MR 0175)

 

Density: 8.28g/cm³.

 

TJC STEEL( TJC IRON& STEEL(GROUP) CO., LIMITED) are handling to produce and supply Inconel X-750 Alloy, N07750 Alloy products with main types of coils, sheets, tubes and pipe fittings such as flanges, elbows, tees, reducers, etc. All of Inconel X-750 Alloy, N07750 Alloy products can be certified by LR, KR, RINA, NK, BV, SGS, TUV, ABS, VL, etc; Mill certificate will be comply with EN10204 3.1 or EN10204 3.2.

 

For more details or assistance regarding Inconel X-750 Alloy, N07750 Alloy , pls contact TJC STEEL via [email protected].