Monel K-500 alloy has similar corrosion resistance with Monel 400 alloy, but has higher mechanical strength and hardness. In the environment with temperature under 480℃, Monel K-500 alloy can be with the properties of good heat resistance, corrosion resistance and long-term structure stability.

 

Different Names for Monel K-500 Alloy: UNS N05500, W.Nr 2.4375.

 

Application:

Monel K-500 alloy is mainly used in manufacture of turbine blades and gas turbine blades on aero-engines whose working temperature is below 750℃. Also can be used in manufacture of fasteners and springs on ships, Pump and valve parts on chemical equipment, Scraping blades on papermaking equipment, etc.

 

Monel K-500 alloy is a kind of non-magnetic alloy. When be welded, Monel K-500 alloy should be taken annealed treatment and after the welding process stress relieved action need to be performed before aging condition.

 

Mechanical Performance for Monel K-500 Alloy:

Name	Grade	UNS	W.Nr	Condition/ Heat Treatment	Tensile Strength/ Mpa(min)	Yield Strength/ Mpa(min)	Elongation/ %(min)
Ni- Cu Alloy	MONEL K-500	UNS N05500	W.Nr 2.4375	Solution	965	690	20

 

Density for Monel K-500 Alloy: 8.6g/cm³.

 

Chemical Components for Monel K-500 Alloy:

Name

Grade

UNS

W.Nr

Density

C(max)

Si(max)

S(max)

Ni(min)

Cu(max)

Fe(max)

Mn(max)

Ti

Fe(max)

Ni- Cu Alloy

MONEL K-500

UNS N05500

W.Nr 2.4375

8.6

0.18

1.5

0.01

0.5

63

27.0-33.0

2.30-3.15

0.35-0.85

2

 

TJC STEEL( TJC IRON& STEEL(GROUP) CO., LIMITED) are handling to produce and supply Monel K-500 Alloy, N05500 Alloy products with main types of coils, sheets, tubes and pipe fittings such as flanges, elbows, tees, reducers, etc. All of Monel K-500 Alloy, N05500 Alloy products can be certified by LR, KR, RINA, NK, BV, SGS, TUV, ABS, VL, etc; Mill certificate will be comply with EN10204 3.1 or EN10204 3.2.

 

For more details or assistance regarding Monel K-500 Alloy, N05500 Alloy , pls contact TJC STEEL via [email protected].