INFO@TJCSTEEL.COM/ +86-13674998777

Products >> Stainless Steel >> 

  • EN10088-2 X1CrNiMoCuN25-25-5, 1.4537 Stainless Steel Plate
EN10088-2 X1CrNiMoCuN25-25-5, 1.4537 Stainless Steel Plate

EN10088-2 X1CrNiMoCuN25-25-5, 1.4537 Stainless Steel Plate

 EN10088-2 X1CrNiMoCuN25-25-5, also known as grade 1.4537, is a high-alloy austenitic stainless steel with excellent corrosion resistance and high strength. It is particularly suited for applications requiring high resistance to pitting and crevice corrosion, as well as to stress corrosion cracking. This versatile material is widely used in various industries, including chemical processing, petrochemical, and marine environments.

Chemical Composition:

The chemical composition of grade 1.4537 is tightly controlled to ensure its unique properties. The typical chemical composition is as follows:

· Carbon (C): ≤ 0.02%

· Silicon (Si): ≤ 1.00%

· Manganese (Mn): ≤ 1.00%

· Phosphorus (P): ≤ 0.045%

· Sulfur (S): ≤ 0.030%

· Chromium (Cr): 24.00% - 26.00%

· Nickel (Ni): 24.00% - 26.00%

· Molybdenum (Mo): 5.00% - 6.00%

· Copper (Cu): 1.50% - 2.50%

· Nitrogen (N): 0.20% - 0.40%

· Iron (Fe): Balance

Mechanical Properties:

The mechanical properties of 1.4537 are impressive, with the following characteristics:

· Tensile Strength: 650 - 900 MPa

· Yield Strength: ≥ 300 MPa

· Elongation: ≥ 35%

· Hardness: ≤ 280 HB

Heat Treatment:

The steel is typically supplied in the solution annealed condition. If further heat treatment is required, it should be carried out at 1050-1100°C, followed by rapid cooling in water or air.

Available Dimensions:

TJC Steel Group offers a wide range of sizes for the X1CrNiMoCuN25-25-5 stainless steel plate, including:

· Thickness: 3mm - 120mm

· Width: 1000mm - 3000mm

· Length: 2000mm - 12000mm

Custom sizes and specifications are available upon request to meet specific application requirements.

Low-Temperature Impact Test:

Grade 1.4537 demonstrates good toughness at low temperatures, with impact values typically exceeding 100J at -196°C.

Main Applications:

Due to its superior corrosion resistance and strength, grade 1.4537 is commonly used in:

· Chemical and Petrochemical Plants

· Desalination Equipment

· Offshore Oil and Gas Platforms

· Pulp and Paper Industry

· Marine Applications

· Pollution Control Equipment

TJC Steel Group Supply Cases:

TJC Steel Group has successfully supplied grade 1.4537 stainless steel plates to several notable projects, including:

· A chemical processing plant in Germany, where the steel was used for manufacturing heat exchangers due to its excellent resistance to corrosive media.

· A desalination plant in the Middle East, where the high strength and corrosion resistance of 1.4537 were crucial for the construction of saltwater-resistant components.

· An offshore oil rig in the North Sea, where the steel plates were used for structural components that required high toughness at low temperatures.

TJC Steel Group's commitment to quality and customer satisfaction ensures that each delivery meets the stringent requirements of our clients, making us a trusted supplier of 1.4537 stainless steel plates worldwide.

In conclusion, EN10088-2 X1CrNiMoCuN25-25-5, or grade 1.4537, is a high-performance stainless steel that excels in demanding environments. Its unique combination of chemical composition, mechanical properties, and corrosion resistance makes it an ideal choice for critical applications across multiple industries. TJC Steel Group stands ready to meet the challenges of supplying this high-quality material to meet your specific needs.

 


Contact Us

    Tel: +86-371-86107816

    Fax: +86-371-63797816

    Mobile: +8613674998777

    E-mail: info@tjcsteel.com

    Skype: tjccarl

    Add: Floor 16, 25#, Fortune Plaza, Zhengzhou, Henan, China