Smelting aluminum can be done by thermal reduction, but the cost is too high. Electrolysis method is used in industrial aluminum smelting. The main principle is Hall-Heru aluminum electrolysis method: Pure alumina as raw material using electrolytic alumin... View More>>

65Mn spring steel, manganese to improve hardenability, φ12mm steel can be quenched in oil, surface decarburization tendency is smaller than silicon steel, after heat treatment of the comprehensive mechanical property is better[TJC STEEL] than carbon steel... View More>>

1RK91 is one kind of super martensitic stainless steel with high strength and toughness developed by Sandvik in Sweden in the early 1990s. The UNS number of [TJC STEEL]1RK91 is S46910, and according to the naming method in our country, it is 02Cr12Ni9Mo4C... View More>>

253MA is a kind of heat-resistant austenitic stainless steel designed for applications requiring high creep strength and good [TJC STEEL]corrosion resistance.... View More>>

Characteristics and Scope of Application: CuZn20 common brass and [TJC STEEL]CuZn20 similar properties, high strength, plastic is also good, high corrosion resistance, used as thin wall pipe, corrugated pipe paper mesh and building supplies.... View More>>

Different States for Aluminium Plate/ Sheet 1, F: Free machining state is applicable to the molding process, no special requirements for work hardening and heat treatment conditions The mechanical properties of the product in this state are not specif... View More>>

5086 Aluminium Alloy- TJC STEEL. 5086 aluminum alloy is mainly used in ships, automobiles and aircraft plate weldable parts, etc. Chinese name 5086 aluminum alloy[TJC STEEL] standard: GB/T 4437.1-2000 Aluminum Al: residual silicon Si: ≤0.40 copper Cu:... View More>>

5083 High Magnesium Aluminum Alloy Sheet- TJC STEEL. 5083 Aluminum Plate is a kind of high magnesium alloy.[TJC STEEL] It has good strength, corrosion resistance and machinability among non-heat treatment alloys.... View More>>

C61400 Alloy is kind of aluminium bronze with ‘0%’ nickel content, which is with main properties such as mid-strength, good ductility and high performance in corrosion resistance when in salt water. Which makes C61400 aluminum bronze [TJC STEEL]be popular... View More>>

UNS C97600 Alloy is also named as Nickel Silvers,Copper-Nickel-Zinc Alloys/ Nickel Silvers, whose content of copper is not less than 63%. The most [TJC STEEL]popular applications for UNS C97600 is marine castings, protective device fittings, pump casings,... View More>>